Mirror Cells

Fans

Fans are nested inside the cross section of the mirror cell
and do not add additional space requirements below the mirror cell.

Fans are sized to provide an adequate CFM to minimize the time
required for mirror temperature stabilization.

Fan Requirements:

-Fans will have 4 in. leads that must be wired to your power source.

-Fans will be mounted to a support plate which in turn will be mounted directly to the cell frame. The S-plate is black and aluminium .062 thick.

-Vibration may be transferred from fans to scope; however purpose of fans is to rapidly stabilize temperature by increasing heat transfer.

-Use of fans is not recommended for deep sky viewing.

Mirror Box Size Chart:

Low profile design is not available on larger mirrors to insure frame stiffness under heavier loads.